HOT WORK TOOL STEELS
| Mark | Main applications | Werk Nº | Norm DIN | Euronorm | Profile | Delivery Status | C | Si | Mn | Cr | Mo | Ni | Others | Hardness HB30 | Re MPa | Rm MPa | Stretching | Datasheet |
| M 2311 | Pre-hardened low alloy steel, for structural and moulds u... | 1.2311 | 40CrMnMo7 | 40CrMnMo7 |  |
Treated | 0,35-0,45 | 0,20-0,40 | 1,30-1,60 | 1,80-2,10 | 0,15-0,20 | - | P e S ≤ 0,035 | ≤ 230 | - | 1180-1770 | - |  |
| M 2738 | Pre-hardened low alloy steel, for structural and moulds f... | 1.2738 | 40CrMnNiMo8-6-1 | 40CrMnNiMo8-6-4 | |
Treated | 0,35-0,45 | 0,20-0,40 | 1,30-1,60 | 1,80-2,10 | 0,15-0,25 | 0,90-1,20 | P e S ≤ 0,035 | ≤ 235 | - | 1180-1770 | - | |
| *M 2347 | Steel type 1.2344, treated for 390-430 HB, with "S" facil... | 1.2347 | X38CrMoV5-1 | X38CrMoV5-1 | |
- | 0,37-0,42 | 0,90-1,20 | 0,30-0,50 | 5,00-5,50 | 1,20-1,50 | - | P≤0,030 S=0,080-0,120 V=0,90-1,20 | - | - | - | - | |
| M 2714 | Dies for forging, stamping and hot cutting of large numbe... | 1.2714 | 55NiCrMoV7 | 55NiCrMoV7 | |
Treated | 0,50-0,60 | 0,10-0,40 | 0,60-0,90 | 0,80-1,20 | 0,35-0,55 | - | P e S ≤ 0,030 V = 0,05-0,15 | ≤ 248 | - | 1180-1770 | - | |
| *M 2767 | Moulds for thermoplastics and hard plastics injection. Ex... | 1.2767 | 45NiCrMo16 | 45NiCrMo16 | |
Treated | 0,40-0,50 | 0,10-0,40 | 0,20-0,50 | 1,20-1,50 | 0,15-0,35 | 3,80-4,30 | P e S ≤ 0,030 | ≤ 285 | - | 1180-1670 | - | |
| *M 2365 | Moulds for die casting of aluminum and copper alloys. Die... | 1.2365 | 32CrMoV12-28 | 32CrMoV12-28 |  |
- | 0,28-0,35 | 0,10-0,40 | 0,15-0,45 | 2,70-3,20 | 2,50-3,00 | - | P ≤ 0,030 S ≤ 0,020 | ≤ 229 | - | 1180-1770 | - | |
| *M 2367 | Moulds for die casting of aluminum and magnesium alloys. ... | 1.2367 | X38CrMoV5-3 | X38CrMoV5-3 | |
- | 0,35-0,40 | 0,30-0,50 | 0,30-0,50 | 4,80-5,20 | 2,70-3,20 | - | P ≤ 0,030 S ≤ 0,020 | ≤ 229 | - | 1180-1770 | - | |
| M 2344 / M 2344 ESR | Moulds for thermoplastics injection and die-casting alloy... | 1.2344 | X40CrMoV5-1 | X40CrMoV5-1 | |
Annealed | 0,35-0,42 | 0,80-1,20 | 0,25-0,50 | 4,80-5,50 | 1,20-1,50 | - | P≤0,030 S≤0,020 V=0,85-1,15 | ≤ 229 | - | 1180-1770 | - | |
| *STAR VAX | Stainless steel "ESR" for injection and compression of co... | 1.2083 | X40Cr14 | X40Cr14 | |
- | 0,36-0,42 | ≤ 1,00 | ≤ 1,00 | 12,50-14,50 | - | - | P e S ≤ 0,030 | ≤ 241 | - | - | - | |
| *STAR MAX | Pre-treated "ESR" Stainless steel for structures and comp... | 1.2316 | X38CrMo16 | X38CrMo16 | |
- | 0,33-0,45 | ≤ 1,00 | ≤ 1,50 | 15,50-17,50 | 0,80-1,30 | ≤ 1,00 | P e S ≤ 0,030 | - | - | - | - | |
| M 2343 / M 2343 ESR | Moulds for plastic injection and die casting of aluminum ... | 1.2343 | X38CrMoV5-1 | X38CrMoV5-1 | |
Annealed | 0,33-0,41 | 0,80-1,20 | 0,25-0,50 | 4,80-5,50 | 1,10-1,50 | - | P≤0,030 S≤0,020 V=0,30-0,50 | ≤ 229 | - | 1180-1770 | - | |
| M 2711 | Moulds and mould components for the plastics industry, ho... | 1.2711 | 54NiCrMoV6 | 54NiCrMoV6 | |
Annealed | 0,50-0,60 | 0,15-0,35 | 0,50-0,80 | 0,60-0,80 | 0,25-0,35 | 1,50- 1,80 | P e S ≤ 0,025 | ≤ 225 | - | 1180-1770 | - | |
* Through consultation
